Glass Tile / January 22, 2019 / Astrid Auclair
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.
Usually they are available mesh mounted on a fiberglass sheet or as field tiles such as subway 3"x6" 4"x4" 6"x6" and even 12"x12". Stained clear glass tiles are made of clear/translucent glass that are stained during its manufacturing process and then cut into multiple pieces. In this case you can see all the way through it even if it has a dark stain color and that is the reason they are not mesh-backed otherwise you would see the mesh through the glass even after installed. Instead they are mounted on clear-faced or paper-faced sheet. Plain or non-colored clear glass tiles are made of clear/translucent glass and do not have color in it. Though the word "plain" is used to describe these types of tiles they are extremely elegant and easy to work with if you want to give a special "touch" to a kitchen backsplash bathroom and shower or swimming pool.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.