Glass Tile / August 24, 2018 / FifineAsselin
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
Most quality manufacturers sponsor minimum of two-day seminars to ensure a finished look that will last decades rather than months. A Phoenix Arizona based company recently conducted two-day seminars bringing Alex Arcaro of Bisazza to their Scottsdale showroom to teach contractors the fine art of glass tile installation. The benefit of a "paper faced glass tile" is that it allows for an efficient method of installation and is used by quality glass tile manufacturers. When installing a paper faced material 100% of the glass tile is bonded to the substrate which has tremendous benefits especially if it is being used in wet area applications.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.