Glass Tile / September 9, 2018 / FifineAsselin
Often glass tiles are translucent in appearance and any imperfection in either the setting application or the thinset is magnified. Whichever tile is being installed the substrate must be perfectly smooth using the manufacturers suggested setting materials and following their instructions exactly as written. Any "waves or grooves" in setting material are noticeable which is another reason a consumer needs to hire a contractor trained in glass tile installation. Another major quality difference between glass tiles is in the quality of the glass used during production. Oceanside Glass is famous for using recycled bottles in its production and provides consumers with a guide of how much post-consumer recycled material are used in their production and can assist with LEED accreditation. Additionally their state-of-the-art equipment for precision processing in batching changing furnaces and cooling molten glass is revolutionary.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.