Glass Tile / January 24, 2019 / Astrid Hachee
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.