Glass Tile / January 18, 2019 / Fleurette Theriault
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.
According to Wes Wayland of Bisazza USA "It gives a client the ability to clad curved surfaces both concave and convex and to form clean inside and outside corners with more ease and a finished look. This also gives them the ability to create mosaics on furniture walls ceilings pools even cladding of entire buildings with unique designs". Glass tile isnt JUST for the bathroom anymore. Bisazza wants consumers and designers to think outside the box and are offering prefabricated mosaic patterns and designs intended to cover large vertical surfaces as wallpaper would and that are perfectly suited for the bedroom - living room - board room - foyer - etc.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.