Natural Stone / September 4, 2018 / FifineAsselin.
This seal needs to be applied after tiles have been laid and grouted and after any residual dust adhesive or grout need to be removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone. Natural stone tiles are one of the best types of tile that you can lay in your home whether you use them in the kitchen bathroom or anywhere else.
Whenever you have a plan of placing a grout in your natural stone tile you should allow 1-2 days from when you applied the adhesive before beginning to grout. Always make sure that you clean the grout joints thoroughly and have taped off the areas which are not included in grouting in order to avoid grout from spilling over the tile. Mix the grout according to manufacturers specifications. It should have a fine consistency in order to have a fine and lump-free finished product. After you have done pouring all the natural stone tile joints with grout clean the surface of the tile with damp cloth after 10 minutes but be sure not to wipe out the grout from any of the tile joints.
The natural stone tiles are being designed in such a way that they would cater to all your requirements with a single design. These are available in different versions to suit various landscapes. The landscape designs would be eye feasting if you opt for a design which fits your space. The landscape designs include marble tiles travertine tiles sandstone tiles limestone tiles etc. Choose one among the above that fits your landscape and give it an exquisite look and luxury. Choosing your tile out of these many variants is a herculean task. However if you have a professional expert service provider within the reach it would become much easier and hassle free.
There are different types of sealer such as invisible sealer color enhancer sealer deep sealer etc. Depending on your purpose you would choose the proper sealer. For example invisible sealer does not change the character or color of your tiles while still protecting it but color enhancer sealer will make your tiles darker and will bring the color out. Deep sealer is used for more porous natural stone such as limestone and sandstone. This process must be repeated every couple of years depending on the type and quality of you Stone. For example for travertine and limestone this should be done every two to three years and for granite and marble it could be done every four to five years.