Glass Tile / January 11, 2019 / Astrid Hachee
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
The most important step in putting glass tile in a swimming pool is choosing the right installation materials. To reiterate the high rate of expansion and contraction of glass caused by temperature changes is the leading cause of cracks and damage to installed tiles. In order to compensate for this special thin-set adhesives and additives have been developed that expand and contract with the glass. The leading manufacturer of glass-specific tile adhesive systems is MAPEI and their Adesilex P10 thin-set and Keraply additive can be combined into an installation system that is specifically designed for applications where the glass tiles are completely submerged.