Glass Tile / January 21, 2019 / Fleurette Theriault.
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
Clean water is the key to finishing the job quickly and thoroughly. Once the tiles have been cleaned check for any voids or pits and fill them in as needed. Use the sponge and clean water to wipe away any remaining grout. Allow to dry for a few hours and then use a dry cheese cloth to clean the remaining grout residue. After the glass tile has dried for 48 hours its ready for use! Glass tile is not only beautiful to look at its also quite versatile. The Romans were known to use mosaic tiles all over their empire to create a feeling of home and to add religious pictorial and decorative significance to rooms of their homes. So if youd like to do as the Romans did get yourself some tiles.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
Often glass tiles are translucent in appearance and any imperfection in either the setting application or the thinset is magnified. Whichever tile is being installed the substrate must be perfectly smooth using the manufacturers suggested setting materials and following their instructions exactly as written. Any "waves or grooves" in setting material are noticeable which is another reason a consumer needs to hire a contractor trained in glass tile installation. Another major quality difference between glass tiles is in the quality of the glass used during production. Oceanside Glass is famous for using recycled bottles in its production and provides consumers with a guide of how much post-consumer recycled material are used in their production and can assist with LEED accreditation. Additionally their state-of-the-art equipment for precision processing in batching changing furnaces and cooling molten glass is revolutionary.