Glass Tile / January 12, 2019 / Karlotta Boule.
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
Their craftsmen work the glass by hand to transform each tile into a piece as unique as a snowflake. Bisazza glass tile uses the highest quality ingredients and constantly works to improve the production process to result in stronger materials with more vibrant colors. Shortcuts in production and compromises with materials result in a finished product lacking perfectly squared edges color quality and strength. To the untrained eye the product may look similar in display but it is in fact extremely inferior. Quality producers of glass tile may also apply a bevel to each of their tiles to allow for more level and consistent surfaces during installation.
The most important step in putting glass tile in a swimming pool is choosing the right installation materials. To reiterate the high rate of expansion and contraction of glass caused by temperature changes is the leading cause of cracks and damage to installed tiles. In order to compensate for this special thin-set adhesives and additives have been developed that expand and contract with the glass. The leading manufacturer of glass-specific tile adhesive systems is MAPEI and their Adesilex P10 thin-set and Keraply additive can be combined into an installation system that is specifically designed for applications where the glass tiles are completely submerged.