Glass Tile / January 8, 2019 / Fealty Allaire
In addition there are two other eminent glass surface treatments for these tiles: slumping and etching. Smalti tile is type of tile which is an opaque glass. It has been in use from ancient times. "Smalti" is an Italian word and refers to a glass paste. Smalti is made by mixing molten glass with metal oxides for color. Translucent Smalti is a popular variant of smalti glass tile. It looks like stained glass with uniform colors. Byzantine Glass is another smalti variant made from thinner slabs of glass. Metallic Smalti is a swirl of a copper-bearing mineral added into the molten glass before it is pressed. Gold Smalti are made by applying a gold leaf and a thin layer of blown glass. Fused Tile is manufactured using the fusion method. In this type a flat glass is cut into tiles shapes and then fired in a furnace. The clear glass will show the tile until treated with a color.
If you are really set on using glass on your renovation and construction projects there is a way to cut down on costs and that is through the use of discount glass tile. There are a number of places where you can look for them that come with huge discounts on them and these are often due to a number of reasons. One reason for the huge discounts you can get on stock is because these tiles that you get from certain dealers have been discontinued. This does not mean however that they are of lower value or quality than other tiles that you can find at higher prices. This just means that these tiles will no longer be available to you or anybody else once the present stock is sold out.
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.