Glass Tile / January 16, 2019 / Annette Laforest
Since they dont have any color in it and are totally transparent they match any color from granite counter tops to kitchen cabinets and easily blend into the environment. Stained and Plain Clear Glass Tiles require more attention when installing. Because you can see what is on the other side of the tile you may end up seeing the path made by the trowel when the installer was butting the wall. So it is recommended to use a white adhesive such as mastic and also butter the back of the tiles. Make sure to press the tiles firmly against the wall with a grout float and take a look if there is any air bubbles after each piece has been placed so you may correct the problem before the adhesive dries. Definitely this type of glass tiles takes more time to install but the result is absolutely worth. Glass tile is all the rage in interior decorating right now but the real star is recycled glass tile.
These are tiles that are made with the use of recycled glass taken from old bottles old windows and other glass items that no longer have any real use. These recycled tiles are made by grinding the old glass into a fine powder color is then added to this powder and the resulting mixture is then pressed into tile molds. These are then baked and cooled. Getting inexpensive tile is easy if you know where to look. Some of the best places for you to find these tiles are online or in home improvement stores near you. Just look for glass tiles in the sale area of these stores or in the discontinued section of these sites that sell them for cheap. To most tile retailers the largest customers are always the people tiling their pools.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.