Glass Tile / August 24, 2018 / FifineAsselin
Combine glass with woods metals and textiles to create dynamic memorable interior designs. Another possibility when working with glass tiles is matching your custom art glass tiles to custom glass vessel sinks or art glass lighting such as chandeliers pendants and sconces. There are very few mediums that offer this type of design versatility. The work of glass artisans can be coordinated to go far beyond simple wall covering to create several coordinating functional works of art for your home. To explore the custom glass option that is right for you you can go to favorite artists or go to a custom glass dealer. Major tile dealers tend to deal in high volume sales and are not usually positioned to offer art glass solutions.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
Although the definition of clear/translucent glass is "allowing light to pass through partially or diffusely" it doesnt mean that all clear glass tiles are transparent in a way that you can see for example an object or your hand behind it. Clear glass is the material used to make these tiles but they can have color or not. There are basically three types of clear glass tiles: back colored stained and plain or non-colored. Back colored clear glass mosaic tiles are by far the most popular in the market. The tiles are made of clear/translucent glass usually from 4mm to 8mm thick and they receive a coating/painting on the back during manufacturing which is what gives the color to the tile.