Glass Tile / September 3, 2018 / FifineAsselin
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
The elasticity of the Adesilex P10/Keraply combination allows the glass tiles to stretch without breaking and MAPEI is so confident in this installation solutions ability to provide lasting results that they offer a 5-year warranty on materials and labor. With a guarantee like that its no wonder that so many tile contractors and retailers stand behind MAPEIs products as the best in the industry. Whether you are installing glass tile on the exterior of your home as an accent in the garden or on the bottom of your swimming pool you need to take into account the unique challenges that comes with using glass tile outdoors. These challenges are not insurmountable as long as you take care to use the proper installation materials.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.